ANCHOR
TYPE | KEY
FEATURES | SIZE RANGE
(Inches) | CORROSION
RESISTANCE | PERFORMANCE | HEAD STYLES | APPROVALS/
LISTINGS |
Trubolt+®
Seismic Wedge Anchors
|  |  Zinc-plated carbon steel to ASTM B633, SC1, Type III
| Pullout strength of 4,980 lbs in 2,500 psi Cracked Concrete (1/2" diameter) | Hex nut
| ICC Evaluation Service, Inc.– #ESR-2427 Approved for: Seismic zones A-F and Cracked Concrete)
Category 1 performance rating
2003 IBC & 2006 IBC Compliant
Meets ACI 318 Ductility Requirements
Tested in accordance with ACI 355.2 and ICC-ES AC 193.
|
2003 IBC & 2006 IBC Compliant
All seismic zone (A-F) and cracked concrete approved
Fully-threaded
Length ID head stamped
Through-fixture fastening | Diameter: 3/8, 1/2 & 5/8
Length:
3 – 8-1/2 |
Trubolt®
Wedge Anchors
|  | Zinc-plated carbon steel to ASTM B633, SC1, Type III
Hot dipped galvanized to ASTM A -153
Type 304 and
316 stainless steel | Ultimate Pullout Performance in 4000 psi Concrete up to 26,540 lbs. (1" diameter) | Hex nut
Tie-Wire version | ICC Evaluation Service, Inc.– #ESR-2251 (formerly ICBO ER1372 which includes seismic loading conditions)
GSA: A-A-1923A Type 4 (Formerly GSA: FF-S-325 Group II, Type 4, Class 1)
Underwriters Laboratories
Factory Mutual
City of Los Angeles – #RR2748
California State Fire Marshal
Caltrans
|
2003 IBC & 2006 IBC Compliant
Seismic zone (A-B) approved
Fully-threaded
Length ID head stamped
Stainless steel clip
Through-fixture fastening | Diameter:
1/4 –1
Length:
1-3/4 –12 |
Large Diameter Tapcon (LDT) and LDTX
Self-Threading Anchor
| | Zinc-plated carbon steel to ASTM B695 & B633
Type 410 stainless steel
Now with EnvireX coating.
Approved for use in ACQ lumber (Excessive content of copper in ACQ lumber may affect the anchor finish.
1,000 hours salt spray ASTM B117 | Ultimate Pullout Performance in 4,000 psi Concrete up to 23,266 lbs. (3/4" diameter)
| Finished bolt style | Florida Building Code |
Anti-rotation searrated washer
Extra large hex washer head
Length ID head stamped
Through-fixture fastening | LDT with Zinc Plating
Diameter:
3/8 – 3/4
Length:
1-3/4 – 6-1/4
LDTX with EnvireX Coating
Diameter:
3/8 & 1/2
Length: 3 – 5 |
Multi-Set II®
Drop-In Anchors
| 
| Zinc-plated carbon steel to
ASTM B633, SC1, Type III
Type 18-8 and 316 stainless steel | Ultimate Pullout Performance in 4,000 psi Concrete up to 9,480 lbs.(3/4" diameter) | RM: Flanged body
RL: Non-flanged body
Use any bolt or threaded rod | GSA: A-A-55614 Type 1 (Formerly GSA: FF-S-325 Group VIII)
Underwriters Laboratories
Factory Mutual
City of Los Angeles – #RR2748
California State Fire Marshal
Caltrans |
RM: Flanged body to keep anchor flush with surface of concrete
RL: Non-flanged body for recessed setting
RX: Designed for hollow core and post tension concrete
CL: Designed for one-sided forming, accepts coil rod | RM – Diameter:
1/4 – 3/4
Length:
1–-3-3/16
RL – Same as
RM (above)
RX – Diameter:
3/8 & 1/2
Length: 3/4 –1
CL – Diameter:
1/2 & 3/4
Length:
2 & 3-3/16 |
BoaTM Coil
Expansion Anchor
| | Zinc-plated carbon steel to ASTM B633, SC1, Type III
| Ultimate Pullout Performance in 4,000 psi Concrete up to 38,500 lbs. (3/4" diameter) | Finished bolt style
| |
Heavy-Duty, Reusable Fastening
Easy installation
Removable
High shear strength
Replacement coil available for easy re-use | Diameter:
1/2 – 3/4
Length:
3–-6- |
Prima
High Expansion
Sleeve Anchors
 | | Sleeve – S300 Pb NFA 35561
Bolt – Grade 5 1035 carbon steel
Cone – S300 Pb NFA 35561
Coating – Zinc NFE 25009, passivation NFA 91472
| Ultimate Pullout Performance in 4,000 psi Concrete up to 8,500 lbs. (1/2" diameter)
| Finished bolt style
| |
Lightweight Concrete, and Masonry Fastening
Easy installation
Removable fastening
| Diameter:
1/4 – 1/2
Length:
2-3/8–-3-9/16 |
Dynabolt®
Masonry Sleeve Anchors
 | | Zinc-plated carbon steel to ASTM B633, SC1, Type III
Type 304 stainless steel | Ultimate Pullout Performance in 4,000 psi Concrete up to 8,900 lbs. (3/4" diameter) | Flat head
Hex nut
Acorn nut
Tie-Wire
Round head
Threshold flat head
| GSA: A-A-1922A
(Formerly GSA: FF-S-325 Group II, Type 3, Class 3)
Factory Mutual
California State Fire Marshal
|
Concrete, block and brick
Many choices of head styles
Through-fixture fastening
Available in 304 stainless steel | Diameter:
1/4 – 3/4
Length:
5/8–-6-1/4 |
Stud
Stud Anchors
| | Zinc-plated carbon steel to ASTM B633, SC1, Type III
| Ultimate Pullout Performance in 4,000 psi Concrete up to 7,520 lbs.
| Hex nut
| GSA: A-A-55614 Type 2 (Formerly GSA: FF-S-325 Group VIII, Type 2)
Factory Mutual
Underwriters Laboratories
California State Fire Marshal
|
Bottom bearing
Hammer-driven
Ideal for jacking or leveling
Easy installation | Diameter:
1/4 – 3/4
Length:
1-3/4–-6-1/4 |
Redi-Drive®
High performance
Hammer-Drive Anchors
 | 
| Zinc-plated carbon steel | Ultimate Pullout Performance in 4000psi Concrete up to 2,300 lbs. | Mushroom head
Pipe version (1/4" and 3/8")
Tie-Wire version
Form-drive | FF-S-325 Group VI
Factory Mutual (3/8" Pipe-Drive) |
Simple installation
Small drill size
No torque required
Through-fixture fastening | Diameter: 1/4
Length: 3/4 - 3 |
Tapcon ®
Concrete Anchors with Advance Threadform Technology™
 | 
| Patented Climaseal® coating
Type 410 stainless steel
| Ultimate Pullout Performance in 4000psi Concrete up to 2,380 lbs. | Hex head
Phillips flat head | ICC Evaluation Service, Inc. –#ESR-1671
ICC Evaluation Service, Inc. –#ESR-2202
Metro-Dade County –
#07-3015.03 |
Fast installation
with Condrive tool
Removable
Cuts own threads
Bit included in every box
Through-fixture fastening | Diameter:
3/16 & 1/4
Length:
1-1/4 – 6 |
Hammer-Set™ Nail-Drive Anchors
| 
| Zinc alloy | Ultimate Pullout Performance in 4000psi Concrete up to 793 lbs. | Mushroom head | GSA: A-A-1925A Type 1 (zinc mushroom)
(Formerly GSA: FF-S-325 Group V, Type 2, Class 3) |
Easy installation
Low profile head
Through-fixture fastening | Diameter:
3/16 & 1/4
Length:
7/8 – 2 |
Poly-Set ® All-purpose plastic plug anchors
| 
Unique twisting action
Resistant to moisture, chemicals and atmospheric conditions
Available in pre-packaged kits | Diameter:
3/16 –1/4
Length:
1-1/4 – 1-7/16
3/16" uses
#6– 8 screw
1/4" uses
#10–12 screw | Polyethylene Anchor
(accepts corrosion resistant screw of your choice) | | Kit comes with Phillips head screw (accepts screw style of your choice) | |
(800) 321-4755
